2. KTX has the best stick-fit quality with KTX bit against wobbling and slipping-off problem.? The 4-fans design can be well engaged by the same design on the bit that allows users can easily fasten the screws into the construction material with only one-hand operation.
3. KTX increases 30% more driving torque transferred from the power tool to the screw itself, that not only allows longer battery use but also with the same reason above, users can easily control the screw fastening in process.
4. KTX can reduce the split situation, even close to the edge of the wood piece. This is due to higher torque transfer, so the screw will not follow the wood grain and therefore keeps the surface of the wood piece smooth without splits.
5. KTX has 2 styles: KTX I (for coating consideration) & KTX II (for smaller head diameter)
6. KTX I: its profile is wider, SQ and Combo(SQ+PH) bits can engage tight without wobbling as KTX I bit, and because of its wider configuration, it reduces the head fill significantly during the spinning in the coating process. Also during the fastening process, the driving torque was spread towards the 4-fans of KTX drive that keeps the coating from being damaged by the driving force; truly anti-corrosion function preserved on head portion. PH & PZ bits can be for temporary use, but a little loose.
7. KTX II: its profile is narrower, it is suitable for smaller screw head design, PZ and SQ bits can engage tight without wobbling as KTX II bit. PH & Combo (SQ+PH) bits can be for temporary use, but a little loose.
8. KTX can be designed in various types of screw heads.
9. KTX is protected in the markets by her patents in U.S.A., Taiwan, Australia (USA patent #6,302,632 B1, #6,406,376 B1, #6,289,775 B1, Taiwan patent #155863, Australia patent #2003220705) and other pending patents around the world.
10. KTX will be the unique and innovative design in 21 century, welcome to adopt it. |
(Your message will be sent directly) 