| Jinan Oilfield Equipment Enterprise |
|
Item Number:
|
OEE002 |
|
Product Name:
|
Mud Pump F-1000 |
|
Description:
|
F-1000 single acting triplex mud pumps are authorized by Continental Emsco Company to manufacture in China and fully conform to Continental Emsco Company"s technical requirement.
F-1000 mud pumps are rated at longer stroke length and relatively low stroke per minute. It can increase the service life of expendable parts of fluid end assembly.
The fluid end assembly mainly consists of fluid end, valve assembly, liners and pistons. Fluid end is made of forged alloy steel and three fluid ends of each pump are interchangeable. The suction valve and discharge valve of F mud pump are interchangeable. Liners use Bi metal, the sleeve is made of wear resisting cast iron. Piston and piton rod are of slide fit and sealed with rubber seal rings and are fastened with lock nuts to prevent the piston from loosing.
The valve seat bores have bottom shoulders. The piston and liners are spray lubricated and cooled which allow an extended service life.
The power end assembly mainly consists of frame, crankshaft, pinion shaft, crosshead and extension rod.
Continuous tooth herringbone gear.
One-piece alloy steel crankshaft.
Replaceable crosshead guides.
Frame fabricated steel plate weldment provides the optimum rigidity, high strength and lightweight.
Double sealing structure for extension rod provides good sealing.
Power end utilizes the combination lubricating system of forced lubrication and splashing lubrication.
|
|
Specification:
|
Performance Data Sheet F-1000 Pump (6 3/4 x 10)
SPM HP Liner size (in) & working Pressure (psi)
6 3/4 6 1/2 6 5 1/2 5 1/8 4 3/4 4 3/8
2343 2643 3014 3457 4000 4700 4900
Flow Rate (GPM)
150 1072 570.34 505.18 443.98 386.86 333.58 284.24 238.74
140* 1000 532.35 471.54 414.43 361.01 311.28 265.25 222.91
130 929 494.23 437.91 384.88 335.29 288.99 246.26 206.95
120 857 456.24 404.14 355.21 309.44 266.83 227.40 190.99
110 786 418.25 370.51 325.66 283.72 244.54 208.40 175.16
100 714 380.27 336.74 295.98 257.86 222.38 189.41 159.20
1 3.80 3.37 2.96 2.58 2.22 1.89 1.59
Notes
1) Based on 100% volumentric efficiency and 90% mechanical efficiency.
2) * Recommended speed and input horsepower for continuous services.
|
|
Safety
Approval:
|
API Standard |
|
|
|
|
|
|
 |
Send Message  (Your message will be sent directly) |
|
|
|
|
|
|
