| Shenzhen anges machinery Co., Ltd |
|
Item Number:
|
screw type water cooled chiller |
|
Product Name:
|
screw type water cooled chiller |
|
Description:
|
The compressor adopts the international famous and new type and high effect screw rotator compressor. Its efficiency is 20% - 30% higher than the ordinary compressor and obtains the patent of many of the occident countries and each of the IS9001 International Quality Authentication.
High efficiency 5:6 patent asymmetry rotator tooth type.
The capacity control can adopt four-segment (100%-75%-50¡X25%) or three-segment (100%-66%-33%) and non-segment control system.
Adopt the 11 bearing and a type axis direction propelling force balance drum combination design and enhance greatly 2.5-3.5 times of the bearing's life
adopt efficient silicon steel plate special slot design and it is equipped with the inside and outside all around design to cool the flow channel so that the compressor motor can exert the maximum efficiency under any load or selection.
Adopt built-in oil pressing system, it can guarantee the compressor maintain the optimal lubricate effect without the oil pump and the detaching machine adopts the double layer filtering method with the good oil filtration effect. The thermal exchanger can exert the maximum capacity.
High efficiency, low noise and low shake.
Besides R22 cooling medium, it can adopt the environmental friendly cooling medium such as R134a and R407c etc. It can effectively avoid the extra consumption caused by over compression or insufficient compression.
All around compressor volume ratio (VI=2.2/2.6.3.0/3.5) for selection and it can effectively avoid the extra consumption of energy caused by over compression or deficiency of the compression.
|
|
Features:
|
The compressor adopts the international famous and new type and high effect screw rotator compressor. Its efficiency is 20% - 30% higher than the ordinary compressor and obtains the patent of many of the occident countries and each of the IS9001 International Quality Authentication.
High efficiency 5:6 patent asymmetry rotator tooth type.
The capacity control can adopt four-segment (100%-75%-50¡X25%) or three-segment (100%-66%-33%) and non-segment control system.
Adopt the 11 bearing and a type axis direction propelling force balance drum combination design and enhance greatly 2.5-3.5 times of the bearing's life
adopt efficient silicon steel plate special slot design and it is equipped with the inside and outside all around design to cool the flow channel so that the compressor motor can exert the maximum efficiency under any load or selection.
Adopt built-in oil pressing system, it can guarantee the compressor maintain the optimal lubricate effect without the oil pump and the detaching machine adopts the double layer filtering method with the good oil filtration effect. The thermal exchanger can exert the maximum capacity.
High efficiency, low noise and low shake.
Besides R22 cooling medium, it can adopt the environmental friendly cooling medium such as R134a and R407c etc. It can effectively avoid the extra consumption caused by over compression or insufficient compression.
All around compressor volume ratio (VI=2.2/2.6.3.0/3.5) for selection and it can effectively avoid the extra consumption of energy caused by over compression or deficiency of the compression.
|
|
|
|
|
|
|
 |
Send Message  (Your message will be sent directly) |
|
|
|
|
|
|
