GRS-12H, HEAVY DUTY GANG RIP SAW Manufacturers and GRS-12H, HEAVY DUTY GANG RIP SAW Suppliers

FEATURS:

1) THE MACHINE IS SUITABLE TO RIP WOOD PANELS, FURNITURE BOARD, BULIDING MATERIAL,DECORATION MATERIALS, ACRYLIC BOARDS AND LIGHT METALLICS BOARDS ETC.

2) THE ULTIMATE PRECISION SAW SPINDLE OF RIGIDITY AND STABILITY CONSTRUCTION ENSURE HIGH WORKING PRECISION AND EXTENDED SERVICE LIFE.

3) THE FC-30 ONE-PIECE CAST MACHINE WITH RUSTPROOF ENSURES RIGIDITY AND STABILITY OF THE MACHINE.

????

SYNCHRONIZED AND POWER FEEDING WITH 6 UPPER FEEDING ROLLERS ALONG WITH 4 FEEDIN ROLLERS ON THE WORKING TABLE ENABLE SMOOTH AND UNITERRUPTED CUTTING.

UPPER FEEDING AXLE OF 40mm IN DIAMETER, THE UPPER AND LOWER FEEDING ROLLERS OF 140mm IN DIAMETER, LENGTH = 305mm, MINIMUM LENGTH OF WORKPIECE= 230mm.

THE SAWING BLADELOCATED UNDER THE WORKING TABLE PROVIDES STABLE AND SMOOTH CUTTING IN SAFE OPERATION AND HANDY DISPOSAL OF WOOD CHIPS AS A HIGHLY EFFICIENT DESIGN.

THE UPPER AND LOWER FEEDING ROLLERS COME WITH A UNIVERSAL ADAPTER FOR SYNCHRONIZED TRANSMISSION OF POWERFUL AND ACCURATE TRANSMISSION.

THE SAW SPINDLE MOTOR AND THE SAWING SPINDLE COME WITH A COUPLER ALLOWINGTHE SAW TO GO UP AND DOWN IN SYNCHRONIZATION WITHOUT GOING OFF THE FIXED CENTER WHILE DEEPING THE BELT IN PRESET TENSION FOR EASY AND FAST OPERATION.

AN EASY AND HANDY DESIGN MICRO SWITHCH CONTROLS THE INDEPENDENT LIFT AND THE TRIP LIMIT OF BOTH THE UPPER FEEDING ROLLER AND THE SAW SPINDLE THAT MAKES THE OPERATION SAFE AND CONVENIENT.

THE TWO 5¡¨-DIAMETER CHIP REMOVERS ARE DESIGNED IN THE LOWER REAR SECTION FOR FAST AND EASY INSTALLATION.

THE FEEDING GEAR OF NON-STAGE TRANSMISSION MAKES THE SAW APT FOR EASY WORKS ON BOTH SOFT AND HARD WOODS.

THE 6 UPPER FEEDING ROLLERS ARE PROVIDED WITH PNEUMATIC CYLINDER OF 3-STAGE CONTROL FOR EASY AND FAST PRESSURE ADJSUTMENT.

THEIS MACHINE COMES WITH 3 STAGES OF ANTI-KICK-BACK DESIGN, 2 ON THE TOP AND 1 ON THE BOTTOM, PROVIDING MAXIMUM SAFETY TO BOTH THE OPERATOR AND THEMAHCINE.

MOD.: GRS-12H

MOD.: GRS-12HA