| ProSource Electronics Co, Ltd. |
|
Item Number:
|
|
|
Product Name:
|
Multi Channel Power Amplifier |
|
Features:
|
- 50 Watts Per Channel into 8 Ω, Less than 0.03% THD
- 2x500VA Toroidal Power Transformer
- 60,000 £gF Distributed Power Supply Capacitance
- 24 Discrete High Speed Output Transistors
- Automatic Power On-Off by 3 V to 30 V Trigger
- Modular Construction
- Multiple Relay Protection
- Individual Input processing
- Gold-Plated RCA Input Jacks
- Gold-Plated Speaker Terminals
- 6 Left and Right Input Buses
- Looping Output Connectors
- DC Voltage, Current Overload, Over Heat Protection Indicators
- Removable IEC AC Cord
- Flexible audio inputs/outputs configuration
- 40Hz Low Frequency filter configuration
- Fully remote control
- Individual volume controls
- Audio control source processing (optional)
|
|
Specification:
|
- Continuous Power Output:
50 watts RMS x 12, 20 Hz - 20 kHz into 8 Ω
90 watts RMS x 12, 20 Hz - 20 kHz into 4 Ω
- Current Capacity:
?10 amps peak per channel
- Slew Rate:
?> 90 V/microsecond
- Frequency Response:
20 Hz-20 kHz, +/- 0.25 dB
- Total Harmonic Distortion:
< 0.1 % at full power; < 0.03 % typical levels
- IM Distortion:
< 0.03 %
- Dynamic Headroom:
> 1.6 dB
- Interchannel Crosstalk:
> 70 dB at? 1 kHz
> 60 dB at 20 kHz
- Input Impedance:
33 k Ω for each channel Input
- Input Sensitivity:
0.7 V for full output
- S/N Ratio:
> 86 dB, input shorted, IHF A-weighted
- Damping Factor:
?> 800 at 20 Hz
- 12 V Trigger Current Requirements
1~2 mA
- Audio Trigger Sensitivity Range
20 mV to 200 mV
- Dimensions:
17" wide x 7" high x 17 1/4" deep (7 5/8" high with feet)
- Power Requirements:
110-120 Vac 1200 Watt
|
|
|
|
|
|
|
 |
Send Message  (Your message will be sent directly) |
|
|
|
|
|
|
