| AIFLON SEALING MATERIALCO.,LTD |
|
Item Number:
|
braided packing |
|
Product Name:
|
all kinds of material braided packings |
|
Description:
|
Aiflon 2000(K) :Braided from low-sulphur expanded graphite yarns, which are reinforced by cotton fiber. It has a very low friction, does not damage shafts or stems. It shows good thermal and chemical resistance and high elasticity.
learn more pls visit:www.aiflonsealing.com
Aiflon 2000I(K):Braided from low-sulphur expanded graphite yarns, reinforced with Inconel wire. It retains all the inherent benefits of 2000 pure graphite packing, good thermal and chemical resistance, very low friction, the wire reinforcement also provides greater mechanical strength
Aiflon 2000P :Made of expanded flexible graphite , which are reinforced by textile fibers, with PTFE impregnation. Compared to traditional graphite packing , it has excellent cross-section tightness, structural strength and very low friction-value, wear resistant, yet gentle to shaft and stem.
Aiflon 2010 :Diagonally braided from expanded flexible graphite, reinforced at the corners throughout with high quality carbon fiber. This corners and body make it three times more resistant to extrusion and also increase the pressure handing capabilities compared to 2000.
Aiflon 2100 :Braided from shrink-proof synthetic fiber impregnated with PTFE dispersion containing graphite particles, silicon-oil-free, which is oxidized polyacrylonitrile fiber. Compared to traditional carbon fiber packing, it is not brittle, can suited for high peripheral speeds and food industries.
Aiflon 2102 :Braided from strong carbon continuous yarns after softening, impregnated with proprietary lubricants and graphite particles, which fill voids, act as a break-in lubricant, and block leakage.
Ailon 2300 :Made of raw film twists of pure PTFE dispersion resins without any lubrication. It is soft, mainly for static sealing. 2300P=2300 + PTFE Impregnation
Aiflon 2304 :Made of sintered, highly stretched PTFE multifilament yarns with thoroughly PTFE impregnation. The packing is then re-impregnated with a mix of PTFE mix during plaiting operation. Good resistance to compression and to extrusion, high structural and cross-sectional density. 2304SC Sintered PTFE Packing with Silicone Core. |
|
|
|
|
|
|
 |
Send Message  (Your message will be sent directly) |
|
|
|
|
|
|
