| Jilin Huahai Trade Co.,Ltd |
|
Item Number:
|
we are manufacturer for security system. |
|
Product Name:
|
multi-beams active infrared sensor |
|
Description:
|
The detectors, which are based on CPU, combining cross-scanning and area dete-
cting, are a new type of multi-beams active infrared detector.The detectors, which are
slim-line design, are made up of the master detector and the slave detector. The acti-
ve infrared detector is powered by the control panel or outer power supply, forming an
invisible beam wall between the master detector and the slave detector to fulfill the
tightly-enclosed guarding of the protector. If any outlawed intrusion occurs, the detect
-or will send alarming signals to the control panel, or the detector will directly
drive the high-power siren to give an on-the-spot alarm through electric cable
or wireless transmitter.
|
|
Features:
|
·Adopting plane guarding theory, that is, when the system is armed, it will not affe
-cted by people’s activities in and out of the guarding plane.
·Compatible with wire /wireless alarm output.
·Supporting on-the-spot alarming, which is controlled by arm/disarm switch And
cost is effectively decreased.
·Rugged aluminum construction with sprayed chromate coating to guarantee no
discoloring and chipped off.
·Multi-beams detection, Common products include 4 beams, 6 beams, 8 beams and
10 Other number of beams can be set in accordance with customers?specific demands.
·Special filter lens to enhance the reliability of the product.
·Built-in LED alignment indicator.
·Built-in arm/disarm indicator .
·Built-in buzzer indicator can be programmed as indicating when single or two adja
-cent beams are broken off. The buzzer buzz or not is controlled by the separate switch
in the end cap.
·Intelligent alignment recognition, no need for accurate optical axis alignment and
easy installation.
·Separate swivel bracket，easy to be installed on the wall or any angle in the horiz
-ontal direction.
·Separate anti-tamper output to support different guarding level.
·Advanced “Three-in-one?detecting technology，high sensitivity and reliability,
suitable for different environments and installation, especial in outside harsh environm
-ents.
|
|
Specification:
|
Model H-S080-10B H-S120-10B H-S160-10B H-S200-10B
Beams 4 beams 6 beams 8 beams 10 beams
Dimensions 31?5?00mm 31?5?200mm 31?5?600mm 31?5?000mm
Maximum Range 10m (outdoor)
Operation Voltage 10.5?5V
Operation Current ≤70mA (normal)
≤150mA (buzzer works when alarming)
The siren-driven current is not included
Response Time ≤40mS
Detection method Can be programmed as alarming when any single beam / two adjacent
beams / three adjacent beams/ four adjacent beams are broken
Alarming Output NO/NC output
Contact capacity: 5A@125VAC,1A@24VDC
Tamper Output NC Switch 0.1A,125VDC
Buzzer Indication Separate buzzer switch can programmed as buzzing when any single beam or two adjacent beams are broken.
On-the-spot Alarming To drive siren directly on output of 1A@24VDC
The function of on-the-spot alarming is controlled by arm/disarm switch.
Operation Temperature -35°C?55°C
|
|
Safety
Approval:
|
CE certificate |
|
|
|
|
|
|
 |
Send Message  (Your message will be sent directly) |
|
|
|
|
|
|
